Description

Extra low center of gravity, rear wheel drive, and low seat height the Renegade power wheelchair (power chair) very stable and practical for both indoor and outdoor use. You’ll enjoy how easy it is to get around and manage daily activities in this electric wheelchair (Renegade). The adjustable controller can be positioned for comfort and ease of operation. The Renegade’s narrow 23.5" width and tight 31" turning radius makes it easy to maneuver around obstacles and in tight spaces. This power wheelchair has a deluxe Captain’s chair available in 20” width and features an adjustable angle backrest, flip-up armrests and swivel for easier, safer transfers. It's heavy-duty performance and a great value. All seats are semi-reclining, foldable, 180-degree swivel Captain’s Seats with headrests.

Features

FEATURES/BENEFITS

Flip-up armrest with adjustable height, width and angle

Four point seat mounting system for lasting durability

Flip-up footplate with adjustable height and angle

Both seats widths are semi-reclining, foldable, 180-degree swivel Captain’s Seats with headrests

Specifications

Specification	Data
Colors Available	Metallic Red, and Blue
Maximum Speed	4 MPH
Maximum Grade/Incline	12 degrees
Weight Capacity	350lbs
Turning Radius	31”
Ground clearance	3”
Estimated Range up	20mi
Battery	12V x 36AH Batteries
Caster tires	8” foam filled
drive wheels	10” foam filled tire
Battery charger	5 A off board charger
Brakes	Intelligent regenerative, electronic brakes
Seat width	20" seat
Seat depth	18”
Seat back height	29" folds don for easy transport
Overall Length	25”
Overall Width	23.5”
Overall height	42”

Warranty

Lifetime on frame

12 Month warranty on Electronic controller

12 Month Warranty on all electronic parts

12 Month warranty on Motors (L/R)

6 Month warranty on Batteries (2)

Measure Guide

Wheelchair/Powerchair measuring Guide

Hip Width: Use this to figure seat width if it is the widest point. Widest Point: Measure the widest area across the lower extremities if different from the hip width. This may influence seat width or arm style. Chest Width: Measure the widest point of the thorax just below the arm pit. This measurement may influence system width or back width. Heel to Knee: Use this for legrest extensions and seat height. SRP to Knee (Seat Reference Point to Knee): This will determine the seat depth. Elbow to SRP (Elbow to Seat Reference Point): Measure this width with the arm in a 90 degree angle at the elbow and the shoulder in a neutral position. Shoulder HeightSeat back height This will determine the height and the style of the back panel or the start for a custom back. Head Height: This will help determine the proper headrest height.

Seat Width: Diagram #

To determine the proper seat width, measure the width of your body from hip to hip (outside hip) while seating down. Please be sure to add an extra inch or so to allow for bulky clothes if relevant.

Seat Depth: Diagram #

To determine the appropriate depth measure from the most posterior point of the body to the inside of your knee. Please be sure to remove at least 2 inches. This helps to allow for a more relaxed posture and also some individuals may prefer additional leg overhang to make room for their hand when lifting their leg.

Seat Back Height: Diagram #

This is measured from the seat base to the top of the chair back. Often users of power chairs need upper back support. Our standard medium back support works fine.

Front seat to Floor

Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the chair will be foot-propelled